Toradex Colibri i.MX 7Dual SoM Demo Image

Experience multi-market demo applications built with Storyboard on your favorite platform. Crank Software demo images showcase Storyboard's design and development capabilities and the application potential of popular platforms. Download the demo image that corresponds with your hardware, which includes everything you need to get and up and running in minutes.

Link: Demo Image Download

Image Name: CrankSoftware_demo_colibri_imx7.sdcard

Board: Toradex Colibri iMX7

Display: EDT 7" TFT WVGA with Touch

Rendering Technology: Linux framebuffer (fbdev)

Demo Resolution: 800 x 480

Operating System: Embedded Linux (Yocto)

This demo image includes the following demos:

  • Home Automation

  • White Goods

  • Medical

Flashing the Image

To flash the Colibri iMX7 module a running U-Boot is required. Boot the module to the U-Boot prompt and insert the SD card (See Section 22.6 or 22.7 on Copying Image to an SD Card) and enter:

  • run setupdate

then to update all components enter:

  • run update

Once the update is complete the board will reboot into the Storyboard Demo Launcher.

U-Boot

If no U-Boot is present on the board additional steps are required. Please refer to the instructions on Toradex's website to get U-Boot on the board.

http://developer.toradex.com/knowledge-base/flashing-linux-on-imx6-modules

Was this article helpful?
0 out of 0 found this helpful