NXP Demo Images

We’ve made it easy for you and have pre-built images in Storyboard for different scenarios for the most popular STMicroelectronics hardware platforms. Simply select your STM hardware and download the demo images. Follow the instructions below to get up and running quickly.

i.MX 8MQuad Demo Image

Experience multi-market demo applications built with Storyboard on your favorite platform. Crank Software demo images showcase Storyboard's design and development capabilities and the application potential of popular platforms. Download the demo image that corresponds with your hardware, which includes everything you need to get and up and running in minutes.

Demo Details

Link:Demo Image

Image Name: CrankSoftware_demo_iMX8MQ-v6.0.0.sdcard

Rendering Technology: OpenGL

Demo Resolution: 1280 x 720

Operating System: Linux

This demo image includes the following demos:

  • Demo Launcher

  • IoT - Smart Home

  • Movie Kiosk

  • Automotive 3D Instrument Cluster

Copying Image to an SD Card - Linux

To copy the demo image to an SD card under Linux you first need to find the name of the attached SD card located under /dev/. You can then use the dd utility to copy the demo image to a 4Gb (or greater) SD card.

dd if="CrankSoftware_demo_boardname.sdcard" of="/dev/sdX" bs=1M
Copying Image to an SD Card - Windows

To copy the demo image to an SD card under Windows you can use the Win32 Disk Imager utility.

  1. Specify the image file to copy

  2. Specify the SD card device

  3. Click the Write button

creating-an-image.png
Running the Image

Each demo image contains all of the software needed to boot and run the card on the supported devices. Simply place the card in the appropriate SD card slot and power on the board. The cards will auto boot into the Crank Software Demo Launcher.

SCP for Target Application Deployment

You can export a Storyboard application directly to a target from within Storyboard Designer.

When your application is ready to export, click on the Storyboard Application Export button.

360034083111-mceclip0.png

Choose SCP Transfer as the transfer method.

360034083151-mceclip1.png

Enter the export directory information for the application target. For this demo image we created a /usr/crank/scp directory.

360034083171-mceclip2.png

You can also execute your Storyboard application after it has been transferred to the target. Check the Execute after transfer checkbox and type the path to the script that will execute the application. For this demo image we created a /usr/crank/storyboard_scp.sh script for you.

360034083191-mceclip3.png
Turn On or Off the Console

By default the Linux console is disabled to improve performance and to prevent any display artifacts between application transitions. To re-enable the console do the following:

  1. Connect a serial cable board

  2. Interrupt the U-Boot startup sequence

  3. env edit console

  4. Switch ttymxc1 to ttymxc0

  5. env save

To disable the console, repeat the above steps but instead switch ttymxc0 to ttymxc1.

i.MX 6QuadPlus Demo Image

Experience multi-market demo applications built with Storyboard on your favorite platform. Crank Software demo images showcase Storyboard's design and development capabilities and the application potential of popular platforms. Download the demo image that corresponds with your hardware, which includes everything you need to get and up and running in minutes.

Link: Demo Image Download

Image Name: CrankSoftware_demo_imx6qpsabresd.sdcard

Board: i.MX 6QuadPlus SABRE

Display: HDMI with Capacitive Touch

Rendering Technology: OpenGL ES 2.0

Demo Resolution: 1280 x 720

Operating System: Linux

This demo image includes the following demos:

  • IoT - Smart Home

  • Movie Kiosk

  • Automotive 3D Instrument Cluster

Copying Image to an SD Card - Linux

To copy the demo image to an SD card under Linux you first need to find the name of the attached SD card located under /dev/. You can then use the dd utility to copy the demo image to a 4Gb (or greater) SD card.

dd if="CrankSoftware_demo_boardname.sdcard" of="/dev/sdX" bs=1M
Copying Image to an SD Card - Windows

To copy the demo image to an SD card under Windows you can use the Win32 Disk Imager utility.

  1. Specify the image file to copy

  2. Specify the SD card device

  3. Click the Write button

creating-an-image.png
Running the Image

Each demo image contains all of the software needed to boot and run the card on the supported devices. Simply place the card in the appropriate SD card slot and power on the board. The cards will auto boot into the Crank Software Demo Launcher.

SCP for Target Application Deployment

You can export a Storyboard application directly to a target from within Storyboard Designer.

When your application is ready to export, click on the Storyboard Application Export button.

360034083111-mceclip0.png

Choose SCP Transfer as the transfer method.

360034083151-mceclip1.png

Enter the export directory information for the application target. For this demo image we created a /usr/crank/scp directory.

360034083171-mceclip2.png

You can also execute your Storyboard application after it has been transferred to the target. Check the Execute after transfer checkbox and type the path to the script that will execute the application. For this demo image we created a /usr/crank/storyboard_scp.sh script for you.

360034083191-mceclip3.png
Turn On or Off the Console

By default the Linux console is disabled to improve performance and to prevent any display artifacts between application transitions. To re-enable the console do the following:

  1. Connect a serial cable board

  2. Interrupt the U-Boot startup sequence

  3. env edit console

  4. Switch ttymxc1 to ttymxc0

  5. env save

To disable the console, repeat the above steps but instead switch ttymxc0 to ttymxc1.

i.MX 6DualLite Demo Image

Experience multi-market demo applications built with Storyboard on your favorite platform. Crank Software demo images showcase Storyboard's design and development capabilities and the application potential of popular platforms. Download the demo image that corresponds with your hardware, which includes everything you need to get and up and running in minutes.

Link: Demo Image Download

Image Name: CrankSoftware_demo_imx6dlsabresd.sdcard

Board: i.MX 6 SABRE Platform for Smart Devices

Display: LVDS (on board)

Rendering Technology: OpenGL ES 2.0

Demo Resolution: 1024 x 768

Operating System: Linux

This demo image includes the following demos:

  • IoT - Smart Home

  • Movie Kiosk

  • Medical

Copying Image to an SD Card - Linux

To copy the demo image to an SD card under Linux you first need to find the name of the attached SD card located under /dev/. You can then use the dd utility to copy the demo image to a 4Gb (or greater) SD card.

dd if="CrankSoftware_demo_boardname.sdcard" of="/dev/sdX" bs=1M
Copying Image to an SD Card - Windows

To copy the demo image to an SD card under Windows you can use the Win32 Disk Imager utility.

  1. Specify the image file to copy

  2. Specify the SD card device

  3. Click the Write button

creating-an-image.png
Running the Image

Each demo image contains all of the software needed to boot and run the card on the supported devices. Simply place the card in the appropriate SD card slot and power on the board. The cards will auto boot into the Crank Software Demo Launcher.

SCP for Target Application Deployment

You can export a Storyboard application directly to a target from within Storyboard Designer.

When your application is ready to export, click on the Storyboard Application Export button.

360034083111-mceclip0.png

Choose SCP Transfer as the transfer method.

360034083151-mceclip1.png

Enter the export directory information for the application target. For this demo image we created a /usr/crank/scp directory.

360034083171-mceclip2.png

You can also execute your Storyboard application after it has been transferred to the target. Check the Execute after transfer checkbox and type the path to the script that will execute the application. For this demo image we created a /usr/crank/storyboard_scp.sh script for you.

360034083191-mceclip3.png
Turn On or Off the Console

By default the Linux console is disabled to improve performance and to prevent any display artifacts between application transitions. To re-enable the console do the following:

  1. Connect a serial cable board

  2. Interrupt the U-Boot startup sequence

  3. env edit console

  4. Switch ttymxc1 to ttymxc0

  5. env save

To disable the console, repeat the above steps but instead switch ttymxc0 to ttymxc1.

i.MX 6SoloX Demo Image

Experience multi-market demo applications built with Storyboard on your favorite platform. Crank Software demo images showcase Storyboard's design and development capabilities and the application potential of popular platforms. Download the demo image that corresponds with your hardware, which includes everything you need to get and up and running in minutes.

Link: Demo Image Download

Image Name: CrankSoftware_demo_imx6sxsabresd.sdcard

Board: i.MX 6SoloX SABRE

Display: LVDS connector - Pairs with MCIMX-LVDS1 LCD display board

Rendering Technology: OpenGL ES 2.0

Demo Resolution: 1024 x 768

Operating System: Linux

This demo image includes the following demos:

  • IoT - Smart Home

  • Movie Kiosk

  • White Goods

Copying Image to an SD Card - Linux

To copy the demo image to an SD card under Linux you first need to find the name of the attached SD card located under /dev/. You can then use the dd utility to copy the demo image to a 4Gb (or greater) SD card.

dd if="CrankSoftware_demo_boardname.sdcard" of="/dev/sdX" bs=1M
Copying Image to an SD Card - Windows

To copy the demo image to an SD card under Windows you can use the Win32 Disk Imager utility.

  1. Specify the image file to copy

  2. Specify the SD card device

  3. Click the Write button

creating-an-image.png
Running the Image

Each demo image contains all of the software needed to boot and run the card on the supported devices. Simply place the card in the appropriate SD card slot and power on the board. The cards will auto boot into the Crank Software Demo Launcher.

SCP for Target Application Deployment

You can export a Storyboard application directly to a target from within Storyboard Designer.

When your application is ready to export, click on the Storyboard Application Export button.

360034083111-mceclip0.png

Choose SCP Transfer as the transfer method.

360034083151-mceclip1.png

Enter the export directory information for the application target. For this demo image we created a /usr/crank/scp directory.

360034083171-mceclip2.png

You can also execute your Storyboard application after it has been transferred to the target. Check the Execute after transfer checkbox and type the path to the script that will execute the application. For this demo image we created a /usr/crank/storyboard_scp.sh script for you.

360034083191-mceclip3.png
Turn On or Off the Console

By default the Linux console is disabled to improve performance and to prevent any display artifacts between application transitions. To re-enable the console do the following:

  1. Connect a serial cable board

  2. Interrupt the U-Boot startup sequence

  3. env edit console

  4. Switch ttymxc1 to ttymxc0

  5. env save

To disable the console, repeat the above steps but instead switch ttymxc0 to ttymxc1.

i.MX 6ULL Demo Details

Experience multi-market demo applications built with Storyboard on your favorite platform. Crank Software demo images showcase Storyboard's design and development capabilities and the application potential of popular platforms. Download the demo image that corresponds with your hardware, which includes everything you need to get and up and running in minutes.

Link: Demo Image Download

Image Name: CrankSoftware_demo_imx6ullevk.sdcard

Board: i.MX 6ULL Evaluation Kit

Display: 4.3" LCD8000-43T

Rendering Technology: fbdev

Demo Resolution: 480 x 272

Operating System: Linux

This demo image includes the following demos:

  • Medical

  • White Goods - Washing Machine

  • Home Automation

Copying Image to an SD Card - Linux

To copy the demo image to an SD card under Linux you first need to find the name of the attached SD card located under /dev/. You can then use the dd utility to copy the demo image to a 4Gb (or greater) SD card.

dd if="CrankSoftware_demo_boardname.sdcard" of="/dev/sdX" bs=1M
Copying Image to an SD Card - Windows

To copy the demo image to an SD card under Windows you can use the Win32 Disk Imager utility.

  1. Specify the image file to copy

  2. Specify the SD card device

  3. Click the Write button

creating-an-image.png
Running the Image

Each demo image contains all of the software needed to boot and run the card on the supported devices. Simply place the card in the appropriate SD card slot and power on the board. The cards will auto boot into the Crank Software Demo Launcher.

SCP for Target Application Deployment

You can export a Storyboard application directly to a target from within Storyboard Designer.

When your application is ready to export, click on the Storyboard Application Export button.

360034083111-mceclip0.png

Choose SCP Transfer as the transfer method.

360034083151-mceclip1.png

Enter the export directory information for the application target. For this demo image we created a /usr/crank/scp directory.

360034083171-mceclip2.png

You can also execute your Storyboard application after it has been transferred to the target. Check the Execute after transfer checkbox and type the path to the script that will execute the application. For this demo image we created a /usr/crank/storyboard_scp.sh script for you.

360034083191-mceclip3.png
Turn On or Off the Console

By default the Linux console is disabled to improve performance and to prevent any display artifacts between application transitions. To re-enable the console do the following:

  1. Connect a serial cable board

  2. Interrupt the U-Boot startup sequence

  3. env edit console

  4. Switch ttymxc1 to ttymxc0

  5. env save

To disable the console, repeat the above steps but instead switch ttymxc0 to ttymxc1.

i.MX 7ULP Demo Image

Experience multi-market demo applications built with Storyboard on your favorite platform. Crank Software demo images showcase Storyboard's design and development capabilities and the application potential of popular platforms. Download the demo image that corresponds with your hardware, which includes everything you need to get and up and running in minutes.

Demo Details

Link:Demo Image

Image Name: CrankSoftware_demo_iMX7ULP-v6.0.0.sdcard

Rendering Technology: OpenGL ES 2.0

Demo Resolution: 854 x 480

Operating System: Linux

This demo image includes the following demos:

  • Fitness tracker

Copying Image to an SD Card - Linux

To copy the demo image to an SD card under Linux you first need to find the name of the attached SD card located under /dev/. You can then use the dd utility to copy the demo image to a 4Gb (or greater) SD card.

dd if="CrankSoftware_demo_boardname.sdcard" of="/dev/sdX" bs=1M
Copying Image to an SD Card - Windows

To copy the demo image to an SD card under Windows you can use the Win32 Disk Imager utility.

  1. Specify the image file to copy

  2. Specify the SD card device

  3. Click the Write button

creating-an-image.png
Running the Image

Each demo image contains all of the software needed to boot and run the card on the supported devices. Simply place the card in the appropriate SD card slot and power on the board. The cards will auto boot into the Crank Software Demo Launcher.

SCP for Target Application Deployment

You can export a Storyboard application directly to a target from within Storyboard Designer.

When your application is ready to export, click on the Storyboard Application Export button.

360034083111-mceclip0.png

Choose SCP Transfer as the transfer method.

360034083151-mceclip1.png

Enter the export directory information for the application target. For this demo image we created a /usr/crank/scp directory.

360034083171-mceclip2.png

You can also execute your Storyboard application after it has been transferred to the target. Check the Execute after transfer checkbox and type the path to the script that will execute the application. For this demo image we created a /usr/crank/storyboard_scp.sh script for you.

360034083191-mceclip3.png
Turn On or Off the Console

By default the Linux console is disabled to improve performance and to prevent any display artifacts between application transitions. To re-enable the console do the following:

  1. Connect a serial cable board

  2. Interrupt the U-Boot startup sequence

  3. env edit console

  4. Switch ttymxc1 to ttymxc0

  5. env save

To disable the console, repeat the above steps but instead switch ttymxc0 to ttymxc1.

Toradex i.MX 7Dual SoM

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.